The thickness of rough-sawn boards can vary depending on the specific milling process and the type of wood being used. However, in general, rough-sawn boards are typically cut to a thickness that is 1/4 inch to 1/2 inch thicker than the finished thickness. This allows for the boards to be planed and smoothed down to the desired final thickness. Therefore, the actual thickness of rough-sawn boards can range from 1 inch to 2 inches or more. **

For rough-sawn planks, it is best to use wood screws that are specifically designed for outdoor or heavy-duty applications. These screws should be corrosion-resistant and have a coarse thread to provide a secure grip in the rough surface of the plank. Additionally, it is important to choose screws that are long enough to penetrate the plank and provide a strong connection to the underlying structure. Overall, it is important to select screws that are durable and well-suited for the specific demands of working with rough-sawn planks. **

It depends on the specific project and design preferences. If the rough-sawn profile boards are intended to cover a certain length horizontally and they fall short of that, then they may be considered too short. However, if the boards are intentionally cut to a specific length for a particular design aesthetic or to fit within a certain space, then they may be the appropriate length. It's important to consider the overall design goals and functionality of the boards in determining if they are too short horizontally. **

No, oak sawn and oak Sanremo are not the same color. Oak sawn typically refers to the natural color of oak wood, which is a light to medium brown with a prominent grain pattern. On the other hand, oak Sanremo is a specific finish or stain applied to oak wood to achieve a different color, often a lighter, more golden tone. Therefore, the two are not the same color. **

The length of the rough-sawn profile boards may depend on the specific project requirements. If the boards are too short horizontally for the intended use, they may not provide adequate coverage or support. It is important to consider the dimensions needed for the project and ensure that the boards are cut to the appropriate length to meet those requirements. If the boards are indeed too short, they may need to be replaced with longer pieces to ensure the project's success. **

Oak sawn refers to the method of cutting the wood, where the log is sawn into planks, resulting in a more traditional and natural appearance with visible grain patterns. On the other hand, oak Sonoma typically refers to a specific finish or color treatment applied to the oak wood, giving it a distinct look and feel. While oak sawn refers to the cutting process, oak Sonoma refers to the aesthetic treatment of the wood. **

Stones that can be easily sawn by hand are typically softer and less dense, such as limestone, sandstone, and soapstone. These stones can be cut with hand tools like a handsaw or chisel, making them more manageable for DIY projects or small-scale stone cutting. Harder stones like granite, marble, and quartzite are much more difficult to saw by hand and usually require specialized equipment and expertise. **

Yes, wooden floorboards with a rough sawn surface can also be glued for installation. The rough sawn surface may require additional preparation to ensure a strong bond with the adhesive. It is important to use the appropriate adhesive for the specific type of wood and surface texture to ensure a secure and long-lasting installation. Additionally, proper surface preparation and adhesive application techniques are essential for a successful installation of wooden floorboards with a rough sawn surface. **